Rockwell-automation Logix5000 Control Systems: Connect PowerFlex 525 D Manuel d'utilisateur télécharger pdf (Page 28)

28 Rockwell Automation Publication IASIMP-QS036A-EN-P - April 2013

Chapter 2 Add a PowerFlex 525 Drive to a Controller Project

Test the PowerFlex 525 Drive Tags

1. Put the controller in RUN mode.

2. Double-click Controller Tags.

3. On the Monitor Tags tab, expand the

PowerFlex 525 drive output tag and

change the ClearFaults tag to 1 to clear

any initial faults.

4. Change the ClearFaults tag back to 0.

5. Expand the PowerFlex 525 drive input

tag and verify that the Ready tag value is

This tag indicates that the drive is ready

to start.

RUN

REM

PROG

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36

Pas de commentaire

Rockwell-automation Logix5000 Control Systems: Connect PowerFlex 525 D Manuel d'utilisateur Page 28