Rockwell-automation Logix5000 Control Systems: Connect ArmorBlock I/O Manuel d'utilisateur télécharger pdf (Page 13)

Rockwell Automation Publication IASIMP-QS039A-EN-P - July 2013 13

Chapter 1

Use the Rockwell Automation BOOTP/DHCP Utility

The Rockwell Automation BOOTP/DHCP utility is a standalone program that incorporates the functionality of

standard BOOTP/DHCP software with a user-friendly graphical interface. The BOOTP/DHCP utility is in the Utils

directory on the RSLogix 5000 installation CD. The module must have DHCP enabled (factory default and the network

address switches set to an illegal value) to use the utility.

To configure your module by using the BOOTP/DHCP utility, perform the following steps.

1. Run the BOOTP/DHCP software.

The BOOTP/DHCP Request History dialog box appears, showing the hardware addresses of devices issuing

BOOTP/DHCP requests.

2. Double-click the hardware address of the device you want to configure.

The New Entry dialog box appears showing the device’s Ethernet Address (MAC).

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 29 30

Pas de commentaire

Rockwell-automation Logix5000 Control Systems: Connect ArmorBlock I/O Manuel d'utilisateur Page 13