Rockwell-automation 8520-OM Offline Development System User Manual Manuel d'utilisateur Page 80
- Page / 100
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
7-- 6 Using ODS Communication Configuration
Publication 8520-- UM051A--EN--P -- October 2000
Offline DevelopmentManual (ODS) SoftwareUser Manual
Programming from DH+ to DH+ provides access to devices on other
DH+ links that are attached to your DH+ link through a DH network.
These remote programming configurations are available with the
1784-KT and 1784-KL modules.
Figure 7.5 shows a possible programming configuration from DH+
to DH+.
Figure 7.5
Remote Programming Example
DH+ DH+
DH+DH+
Local Link
Remote Link 1
Remote Link 2
Remote Link 3
PLC-5
Address
PLC-5
Address
PLC-5
Address
1785-KA
Address
1785-KA
Address
1785-KA
Address
1785-KA
Address
Programming
Terminal
These rules apply when you set up remote programming:
• The PLC-5 processor on one DH+ link and a PLC-5 processor on
another DH+ link can have the same address.
• The programming terminal can be on any link.
• Address 77 octal is an illegal bridge address on link 3. It
translates to 0xFF, which does not exist on a DH link.
Programming from DH+ to
DH+
- User Manual 1
- Information 2
- Important User 2
- Using this Manual 3
- Warnings, Cautions, and 4
- Important Information 4
- Audience 4
- Terms and Conventions 4
- • full screens 5
- • partial screens 5
- • pop-up windows 5
- • screen text 5
- Related Publications 6
- Summary of Changes 8
- Table of Contentsii 10
- Chapter 7 11
- Introducing ODS 12
- 1-- 3Introducing ODS 14
- Installing ODS 15
- • Start installation again 17
- Modifying the 20
- CONFIG.SYS File 20
- AUTOEXEC.BAT File 21
- Removing the ODS 21
- Software 21
- 2-- 8 Installing ODS 22
- [ENTER] 22
- 2-- 9Installing ODS 23
- What to Do Next 24
- Getting Started with ODS 25
- Using DOS 26
- Using Pulldown Menus 28
- Using Online Help 29
- ↑]orarrow 31
- Copy file entry 31
- Reading the Status Line 32
- Application 33
- Figure 3.3 34
- Application Organization 34
- Using Directories 35
- Entering File and Project 35
- Interpreting Error 36
- Messages 36
- Using the [ESC] Key 36
- Exiting from ODS 36
- Configuring ODS 37
- Keyboard Setup 38
- Configuring the Serial 39
- Communication Setup 39
- Configuring Print Device 40
- (Windows NT only) 40
- Turning the Beeper 40
- Turning the Verify Feature 41
- Executing DOS 42
- Commands from within 42
- Using ODS for Project 43
- Management 43
- [ENTER] to continue 44
- [ESC] to cancel 44
- Opening an Existing 48
- Displaying Project 49
- Changing Project 50
- Copying a Project 53
- Copying files 55
- Renaming a Project 56
- Deleting a Project 57
- Backing Up a Project to 58
- Floppy Disk 58
- Restoring a Backed-up 60
- Restore completed 61
- Selecting an Application 62
- Selecting a Utility 63
- Using ODS File Management 64
- Choosing the File Type 65
- Within a PAL Application 65
- Copying a File from a 65
- Current Project 65
- Renaming a File from a 66
- Deleting a File from a 67
- Copying Files from 68
- Another Project 68
- ] to cancel 70
- Printing an ODS File 71
- Canceling a Printing 72
- Displaying an ODS File 73
- Recovering Backup Files 74
- Using ODS Communication 75
- Configuration 75
- Selecting the 76
- Communication Code 76
- Menu Structure 77
- Configuring a 1784-KL 77
- Configuring a 1784-KT 77
- Figure 7.3 78
- KT Address 79
- Considerations 79
- Programming from DH+ to 80
- 1784-KTK1 81
- Configuring the 81
- KTK1 Address 82
- 6122 Considerations 82
- IBM PC XT Considerations 82
- Configuring a Serial Driver 83
- Using INTERCHANGE 84
- Configuring DH+ Under 85
- Windows NTt In ODS 85
- Configuring RSLinx for 86
- Ethernet 86
- Downloading AMP Files 86
- PN 176947 100
Produits connexes et manuels pour Équipement Rockwell-automation 8520-OM Offline Development System User Manual
Équipement Rockwell-automation 6159 Industrial 17 inch CRT Monitors, Series B Manuel d'utilisateur
(36 pages)
(36 pages)
Équipement Rockwell-automation 2705 RediSTATION Operator Interface User Manual Manuel d'utilisateur
(64 pages)
(64 pages)
Équipement Rockwell-automation 2727-M7P20D1P1, -M7P20D1Q2, -M7P20D1Q3 MobileView Manuel d'utilisateur
(148 pages)
(148 pages)
© 2020, manymanuals.fr. Tous droits réservés | 0.096 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels