Rockwell-automation 6181F_P Series E Integrated Display Computers User Manuel d'utilisateur télécharger pdf (Page 47)

Rockwell Automation Publication 6181P-UM002D-EN-P - February 2014 47

Component Replacement Chapter 4

3. Remove the screw that secures the slot cover (A).

4. Pull out the slot cover (B) and store it.

5. Remove the add-in card from its protective packaging.

6. Slide the add-in card into a compatible riser-board slot (C).

Press to make sure it is firmly seated in the slot.

7. Secure the add-in card with the screw (D).

8. Connect any necessary cables to the add-in card.

9. Refer to any installation instructions that came with the add-in card to

verify that all installation steps are followed.

10. Reinstall the computer cover as detailed in Reinstall the Cover

on page 38.

11. Follow the steps for Post-configuration

on page 37.

ATTENTION:

Do not discard the slot cover. If the add-in card is removed in

the future, the slot cover must be reinstalled to maintain proper cooling.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 75 76

Pas de commentaire

Rockwell-automation 6181F_P Series E Integrated Display Computers User Manuel d'utilisateur Page 47