Rockwell-automation 6180P-xxxx Integrated Display Computers with Keypa Manuel d'utilisateur télécharger pdf (Page 37)

Rockwell Automation Publication 6180P-UM001C-EN-P - February 2014 37

Component Replacement Chapter 4

Drive Precautions

Follow these precautions when working with a drive.

• Do not touch internal components.

• Always handle the drive by its frame.

• Never remove or install a drive with the power on.

• Store the drive in an antistatic bag when it is not installed.

Replace or Install a Drive

You can replace the existing HDD or install another HDD in the empty drive

bay.

Replace the Existing HDD

Follow these steps to replace the existing HDD, which is in the bottom bay.

1. Follow the steps for Pre-configuration

on page 35.

2. Remove the HDD assembly from its bay.

a. Loosen the two captive thumbscrews of

the HDD assembly (A).

b. Pull the HDD assembly from its bay (B).

IMPORTANT

Back up or clone your computer before replacing a drive.

SHOCK HAZARD: Electrostatic discharge (ESD) can damage the computer and

components. Read and follow Electrostatic Discharge Precautions

on page 34

before removing a drive.

Failure to follow proper safety precautions can result in severe electrical shock to

an individual or ESD damage to the computer and its components.

ATTENTION: Mechanical shock can damage a drive. Do not drop or bump the

drive.

B

A

A

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 67 68

Commentaires sur ces manuels

Pas de commentaire