Rockwell-automation 2711 Standard PanelView Operator Terminal User Man Manuel d'utilisateur télécharger pdf (Page 253)

Publication 2711-UM014G-EN-P - September 2008 253

Messages, Codes and Self-test Numbers Appendix B

436 Logic Controller

has screen

control

Reminder You tried to change the application

screen but it is configured for

controller only access.

No action required, controller will

change screens as programmed.

634 Read Fail or

Write Fail

Status ControlLogix Tag or address does not

exist or is the wrong data type.

Designated slot does not contain a

ControlLogix Processor.

Check tag address.

Check for data type mismatch.

Verify ControlLogix slot location.

1109 Font file

unavailable,

Font error = ****

Minor Fault or

Terminal Fault

You downloaded an application to the

PanelView without the appropriate

memory card (containing the font file)

inserted in the card slot of the

terminal.

From the Memory Card screen, press

the Disconnect button to close the

files on the card. Remove the card

from the card slot. Locate the card

containing the font file or copy the

correct font file to a card. Insert the

correct memory card in the card slot

and enter Run mode.

1110 No valid

application

Reminder You tried to run an application that

has not been downloaded to the

terminal.

Download application to terminal.

1118 Access denied. Status Wrong password entered. Enter a valid password.

1119 Access denied. Status Password not recognized Enter a valid password.

1120 Security

tampering.

Status PVA file was corrupted - attempt to

bypass security was detected

New application file must be

downloaded to the terminal.

1121 No operator

selected.

Status There is no currently selected

operator, but a password change has

been requested

Select the operator requiring the new

password.

1122 Password change

is not allowed.

Reminder Password is unchangeable Password cannot be changed at the

current level of security.

1123 Password change

is not allowed.

Reminder Operator cannot change password Current operator does not have

access for password changes.

1124 New password

must be entered

before it can be

verified.

Reminder New pass words must be entered

twice.

Enter the new password again to

verify that it was entered correctly.

1125 New and verify

passwords differ.

Status The same password was not entered

for verification.

Enter the same password for New

and Verify.

1126 Please verify new

password.

Reminder New pass words must be entered

twice.

Enter the new password again.

1127 Password

changed

Reminder Password change is effective. You must use new password for

security access.

2005 Application file:

Insufficient RAM

Terminal Fault Application file may be too large. Try again. If possible, reduce the size

of the application.

2007 - 2010 Application file

contains errors

Terminal Fault Application contains incompatible

data.

Check application and try again.

Error Number Terminal

Messages

Type Meaning Recommended Action

1 2 ... 248 249 250 251 252 253 254 255 256 257 258 ... 291 292

Commentaires sur ces manuels

Pas de commentaire

Rockwell-automation 2711 Standard PanelView Operator Terminal User Man Manuel d'utilisateur Page 253

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Rockwell-automation 2711 Standard PanelView Operator Terminal User Man