Rockwell-automation 2707-NP DTAM PLUS GETTING STARTED USER MANUAL Manuel d'utilisateur télécharger pdf (Page 17)

A–B

Chapter

5–1

Creating a Sample Application

This chapter provides step-by-step instructions on how to create the sample

application described in Chapter 3. It shows how to:

 start the DTAM Plus Programming Software

 create an application file

 enter configuration data

 create application screens

 link application screens

 create an alarm screen

 save the application and exit the software

To run the DTAM Plus Programming Software:

1. Verify that you are at the \DPS subdirectory where the software resides.

If you are not, enter cd DPS and press [Return].

C:\DPS>

2. Type DPS and press [Return] to start the program.

C:\DPS> DPS [Return]

3. Specify whether you are using a color monitor. Enter Y or N.

4. The startup screen displays. It identifies the DPS version and licensed

owner. A phone support number is provided for your assistance.

Chapter Objectives

Starting DTAM Plus

☞ If you installed the software in

another subdirectory, move to

that directory.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 74 75

Pas de commentaire

Rockwell-automation 2707-NP DTAM PLUS GETTING STARTED USER MANUAL Manuel d'utilisateur Page 17