Rockwell-automation 2707-MVH232_MVP232 MicroView Operator Interface Mo Manuel d'utilisateur télécharger pdf (Page 26)

Publication 2707-UM005AB-EN-P

3-10 Initial Setup and Mode Menu

To Simulate an Application:

1. Download the application from the DPS software.

2. From the Mode Menu, select item [4] Other.

The Other Menu appears:

3. Select item [3] Sim.

The simulate enable screen displays:

4. Press [1] to enable the Simulate mode.

The screen will display:

After the new parameter is saved, the MicroView will again

display:

5. Press [5] Ex to exit the Other Menu and display the Mode Menu.

6. From the Mode Menu, reset the MicroView.

The MicroView displays a series of diagnostic tests, enters run

mode, loads the application and then displays the Mode Menu

of the application.

1 Reset

2 Comm

3 Spec

4 Other

1 Code

2 Scale

3 Sim

4 Test

5 Ex

Current Setting

Simulate

0 = Off

OFF (0)

1 = On

COPYING TO MEM

Please Wait . . .