Rockwell-automation 2706-PENET1 InView Ethernet TCP/IP Module Manuel d'utilisateur télécharger pdf (Page 12)

12 InView Ethernet TCP/IP Module

Publication 2706-IN008D-EN-P - October 2003

However, upon successfully setting up the Gateway Address and Subnet Mask, the

following message will appear telling you to cycle power to the module.

After the IP Address, Gateway Address and Subnet Mask have all been established,

click the OK button on the bottom of the Ethernet TCP/IP Communications

window. This will allow the settings to be saved and configuration is now

complete.

Once the settings have been saved, they can now be viewed, by clicking on the

Advanced button located in the section titled TCP/IP settings on the Edit Display

window.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 63 64

Pas de commentaire

Rockwell-automation 2706-PENET1 InView Ethernet TCP/IP Module Manuel d'utilisateur Page 12