Rockwell-automation 2706 Dataliner 20 Message Display Manuel d'utilisateur télécharger pdf (Page 10)

Dataliner DL20 Message Display10

EMI Power-Line Filters (EU Installations Only)

DL20 displays intended for use in the European Union require a power-line filter.

One line filter is required for each installed display. Two filter models are available.

These filters are functionally identical, they differ only in termination style.

Schaffner Part No. Termination Style

FN 660-3/06 Fast-On (Spade) connectors

FN 660-3/07 Wire leads

Line filters are available from an authorized Schaffner distributor.

(FN 660-3/06)

27mm

(1.06 in.)

12 mm

(0.47 in.)

30mm

(1.18 in.)

85 mm

(3.35 in.)

65 mm

(2.56 in.)

5.3 mm

(0.21 in.)

54 mm

(2.13 in.)

(FN 660-3/07)

75 mm

(2.95 in.)

Part Number

When properly installed, power-line filters prevent interference currents in the

power lines. Interference currents can affect other devices on the same power

line and other nearby equipment. Connect the Dataliner message display to the

power-line filter as shown in the following sections.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Rockwell-automation 2706 Dataliner 20 Message Display Manuel d'utilisateur Page 10