Rockwell-automation 2100-ENET E3 Plus EtherNet/IP Adapter Manuel d'utilisateur télécharger pdf (Page 9)

E3 Plus EtherNet/IP Adapter 9

Rockwell Automation Publication 2100-IN090A-EN-P - February 2012

6. Click Next to register the device.

7. Click Finish.

Logix Controller I/O Messaging

RSLogix 5000 software is used to configure I/O messaging between a Logix controller and an E3

Plus EtherNet/IP adapter on an EtherNet/IP network. Follow these steps to configure a Logix

controller for I/O messaging.

1. Right-click on the EtherNet/IP scanner in I/O Configuration and select New Module

to open the Select Module Type dialog box.

2. Select Generic Ethernet Module and click OK.

3. Enter a name for the E3 Plus EtherNet/IP adapter.

The name creates a tag in RSLogix 5000 software that can be used to read and write data

from the E3 Plus EtherNet/IP adapter.

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Rockwell-automation 2100-ENET E3 Plus EtherNet/IP Adapter Manuel d'utilisateur Page 9