Rockwell-automation 20P PowerFlex DC Drive - Frame A SCR Modules for D Manuel d'utilisateur télécharger pdf (Page 3)

PowerFlex® DC Drive - Frame A SCR Modules for Drives with a Power Traces Circuit Board 3

Step 1: Remove Power

from the Drive

1. Remove and lock-out all incoming power to the drive.

Step 2: Remove the

Protective Covers

1. Remove the two screws that secure the power terminal cover to the

drive and slide the cover down and off the drive chassis.

ATTENTION: Remove power before making or breaking cable

connections. When you remove or insert a cable connector with

power applied, an electrical arc may occur. An electrical arc can

cause personal injury or property damage by:

• sending an erroneous signal to your system’s field devices,

causing unintended machine motion

• causing an explosion in a hazardous environment

Electrical arcing causes excessive wear to contacts on both the

module and its mating connector. Worn contacts may create

electrical resistance.

L1 L2 L3

1 2 3 4 5 6 7 8 ... 17 18

Pas de commentaire

Rockwell-automation 20P PowerFlex DC Drive - Frame A SCR Modules for D Manuel d'utilisateur Page 3