Rockwell-automation 20P, 23P PowerFlex DC Drive and SAR Control Circui Manuel d'utilisateur télécharger pdf (Page 15)

Publication 20P-IN004B-EN-P

Step 7: Install the New

Control Board

1. Install the new control board in the reverse order of removal as detailed in

Step 6: Remove the Existing Control Board

on page 13.

2. Verify that all DIP switch and jumper settings match those recorded in the

chart on page 13

. Refer to the PowerFlex DC Digital Drive User Manual,

publication 20P-UM001

, for detailed information on DIP switch and

jumper settings.

Step 8: Wire the Control

Board

Install the I/O and control wiring in reverse order of removal.

Figure 1 I/O and Control Wire Routing

Route I/O and control

wiring between

bottom front cover

and power terminal

cover/shield.

(Frame A shown)

1 2 ... 10 11 12 13 14 15 16 17 18

Pas de commentaire

Rockwell-automation 20P, 23P PowerFlex DC Drive and SAR Control Circui Manuel d'utilisateur Page 15