Rockwell-automation 20D-RES-A0 PowerFlex 700S Resolver Feedback Option Manuel d'utilisateur télécharger pdf (Page 5)

Resolver Feedback Option Card for PowerFlex® 700S Drives 5

Step 2: Removing the

Control Assembly

(if necessary)

This step is necessary only when another drive or panel component blocks

access to the control assembly. Avoid removing it if possible.

Step 3: Removing the

Feedback Option Card

Task Description

Unplug I/O and SynchLink cables from the main control board, unplug feedback wiring

from feedback option feedback option card, and unplug communication cables from

DriveLogix controller

Unplug ribbon cable

Remove M5 nuts

Remove control assembly

Proper tightening

torque for reassembly

is 18 lb.-in.

Task Description

Remove screws

Remove feedback option board and through-board pin connectors from main control board

Remove standoffs from main control board (on Phase I drive only)

Note: Phase I shown.

1 2 3 4 5 6 7 8 9 10 ... 15 16

Pas de commentaire

Rockwell-automation 20D-RES-A0 PowerFlex 700S Resolver Feedback Option Manuel d'utilisateur Page 5