Rockwell-automation 1797-OE8H FLEX Ex 8 Output Analog Modules Manuel d'utilisateur télécharger pdf (Page 10)

10 FLEX Ex 8 Output and HART Analog Modules

Publication

1797-5.3 - September 2011

Wire the Module to a 1797-TB3 or 1797-TB3S Terminal Base Unit

Module Wiring

1. Connect the individual output wiring to (+) terminals (0, 4, 8, 12) on

the 0…15 row (A) and on the 16…33 row (B) (terminals 17, 21, 25,

29) as indicated in the table,

Wire Connections.

1. Connect the associated output to the corresponding (-) terminal (1, 5,

9, 13) on the 0…15 row (A), and on the 16…33 row (B) (terminals 18,

22, 26, 30) for each output as indicated in the table,

Wire Connections.

WARNING

If you connect or disconnect wiring while the field-side power is on, an electrical

arc can occur. This could cause an explosion in hazardous location installations.

Be sure that power is removed or the area is nonhazardous before proceeding.

41307

41440B

Row A

Row B

Row C

No connections allowed to terminals 2, 3, 6, 7, 10, 11, 14, 15, 19, 20,

23, 24, 27, 28, 31, 32, 36, 37, 38, 39, 46, 47, 48, 49.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 51 52

Pas de commentaire

Rockwell-automation 1797-OE8H FLEX Ex 8 Output Analog Modules Manuel d'utilisateur Page 10