Rockwell-automation 1794-FLA FlexLogix Controller Installation Instruc Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement Rockwell-automation 1794-FLA FlexLogix Controller Installation Instruc. Rockwell Automation 1794-FLA FlexLogix Controller Installation Instructions User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 28
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Publication 1794-IN002G-EN-P - January 2004
Installation Instructions
FlexLogix Controller System
Catalog numbers 1794-L33, 1794-L34, 1794-FLA
Use this document as a guide for installing your FlexLogix
controller system. This
document provides installation instructions for both the FlexLogix controller
(1794-L33, -L34) and the FlexLogix extended-local I/O adapter (1794-FLA). You
should already be familiar with the FlexLogix system components. See the
documentation references for additional information.
You must FLASH upgrade the firmware on your FlexLogix controller before you
can use it. The controller ships with firmware revision 1.x but must be upgraded to
match the version of RSLogix 5000 that you are using (e.g. if you are using
RSLogix 5000 V11, you must upgrade your FlexLogix controller firmware to revision
11.x before using it). For more information on upgrading your controller’s
firmware, see page 22.
Tools That You Need
You need the following tools to install your FlexLogix controller system.
slotted screwdriver
phillips screwdriver
mounting hardware (for mounting a DIN rail)
drill (for mounting a DIN rail)
needle-nose pliers
Obtain a User Manual
This product also has a user manual (pub. no. 1794-UM001). To view it, visit:
www.theautomationbookstore.com. To purchase a manual, you can:
contact your local distributor or Rockwell Automation representative
visit www.theautomationbookstore.com and place an order
call 800.963.9548 (USA/Canada) or 001.320.725.1574 (outside USA/Canada)
Vue de la page 0
1 2 3 4 5 6 ... 27 28

Résumé du contenu

Page 1 - FlexLogix Controller System

Publication 1794-IN002G-EN-P - January 2004Installation InstructionsFlexLogix Controller SystemCatalog numbers 1794-L33, 1794-L34, 1794-FLAUse this do

Page 2 - ATTENTION

10 FlexLogix Controller SystemPublication 1794-IN002G-EN-P - January 2004Step 2: Install the BatteryFor Safety information on the handling of lith

Page 3 - Environment and Enclosure

FlexLogix Controller System 11Publication 1794-IN002G-EN-P - January 2004Step 3: Install Communication Daughtercards (optional)For specific inform

Page 4

12 FlexLogix Controller SystemPublication 1794-IN002G-EN-P - January 2004Step 4: Install the Controller1. Position the FlexLogix controller on the

Page 5

FlexLogix Controller System 13Publication 1794-IN002G-EN-P - January 20044. Make sure power is not applied to the power supply.5. Connect the powe

Page 6 - AVERTISSEMENT

14 FlexLogix Controller SystemPublication 1794-IN002G-EN-P - January 20046. Mount the I/O terminal bases on the DIN rail.For information about I/O

Page 7 - Other Considerations

FlexLogix Controller System 15Publication 1794-IN002G-EN-P - January 2004Step 5: Install the Extended-Local Adapter (optional)1. Position the 1794

Page 8 - What You Need to Do

16 FlexLogix Controller SystemPublication 1794-IN002G-EN-P - January 20044. Make sure power is not applied to the power supply. Connect the power

Page 9

FlexLogix Controller System 17Publication 1794-IN002G-EN-P - January 20047. Connect the adapter to the controller.The following diagram shows how

Page 10 - Step 2: Install the Battery

18 FlexLogix Controller SystemPublication 1794-IN002G-EN-P - January 2004Make an RS-232 Connection to the ControllerThe RS-232 port is a non-isola

Page 11 - Removing a Communication Card

FlexLogix Controller System 19Publication 1794-IN002G-EN-P - January 20042. Select the appropriate cable.Are you using an isolator?Use this cable:

Page 12

2 FlexLogix Controller SystemPublication 1794-IN002G-EN-P - January 2004Important User InformationSolid state equipment has operational characteri

Page 13

20 FlexLogix Controller SystemPublication 1794-IN002G-EN-P - January 20043. Connect the appropriate cable to the serial port on the controller.Be

Page 14 - Removing the controller

FlexLogix Controller System 21Publication 1794-IN002G-EN-P - January 2004Select the Operating Mode of the Controller1. Use this table to determine

Page 15

22 FlexLogix Controller SystemPublication 1794-IN002G-EN-P - January 2004Monitor the Controller LEDsFLASH Upgrade the Controller’s Firmware Revisi

Page 16

FlexLogix Controller System 23Publication 1794-IN002G-EN-P - January 2004Update the Controller1. Connect the controller to the same network as you

Page 17

24 FlexLogix Controller SystemPublication 1794-IN002G-EN-P - January 2004FlexLogix Controller Approximate Mounting Dimensions199.49mm (7.85in)84.9

Page 18

FlexLogix Controller System 25Publication 1794-IN002G-EN-P - January 2004FlexLogix Extended-Local I/O Adapter Approximate Mounting DimensionsAppro

Page 19

26 FlexLogix Controller SystemPublication 1794-IN002G-EN-P - January 2004Other PublicationsYou can use the following manuals with this product:You

Page 20

FlexLogix Controller System 27Publication 1794-IN002G-EN-P - January 2004power supply 1794-PS3 or 1794-PS13 – In applications that must be complia

Page 21

Publication 1794-IN002G-EN-P - January 2004 PN 957867-01Supersedes Publication 1794-IN002F-EN-P - October 2002 Copyright © 2004 Rockwell Automation, I

Page 22 - Monitor the Controller LEDs

FlexLogix Controller System 3Publication 1794-IN002G-EN-P - January 2004Environment and EnclosurePrevent Electrostatic DischargeATTENTIONThis equi

Page 23 - Update the Controller

4 FlexLogix Controller SystemPublication 1794-IN002G-EN-P - January 2004European Hazardous Location ApprovalEuropean Zone 2 Certification (The fol

Page 24

FlexLogix Controller System 5Publication 1794-IN002G-EN-P - January 2004North American Hazardous Location ApprovalThe following information applie

Page 25 - Dimensions

6 FlexLogix Controller SystemPublication 1794-IN002G-EN-P - January 2004WARNINGEXPLOSION HAZARD• Do not disconnect equipment unless power has been

Page 26 - Specifications

FlexLogix Controller System 7Publication 1794-IN002G-EN-P - January 2004Removal and Insertion Under PowerThe FlexLogix controller, the extended-lo

Page 27

8 FlexLogix Controller SystemPublication 1794-IN002G-EN-P - January 2004What You Need to DoBefore you can install a FlexLogix controller or extend

Page 28

FlexLogix Controller System 9Publication 1794-IN002G-EN-P - January 2004Step 1: Verify That You Have All the ComponentsThese components ship with

Commentaires sur ces manuels

Pas de commentaire