Rockwell-automation 1792D-OB4D ArmorBlock MaXum 4 Output Module Series Manuel d'utilisateur télécharger pdf (Page 5)

ArmorBlock MaXum 4 Output Module Series B 5

Publication 1792D-IN040B-EN-P - September 2000

1. Position the module over the mounted cable base. Align the

three captive screws in the module with the accepting

receptacles in the base.

2. Tighten the screws with a torque of 8 inch-pounds to secure

the module to the base.

IMPORTANT

Dimensions change according to the cable base

and module combination used.

Cable Base

1792D-CBFM is

used for this

example.

Assembled dimensions in (mm)

41950

1.9 in

48.26 mm

4.72 in

120 mm

2.7 in

68.6 mm

Align the

screws to

properly

assemble the

module to the

base.

1 2 3 4 5 6 7 8 9 10 ... 15 16

Pas de commentaire

Rockwell-automation 1792D-OB4D ArmorBlock MaXum 4 Output Module Series Manuel d'utilisateur Page 5