Rockwell-automation 1792D-8BV0D ArmorBlock MaXum 8 Input Module with 8 Manuel d'utilisateur télécharger pdf (Page 4)

4 ArmorBlock MaXum 8 Input Module with 8 Connectors, Series B

Publication 1792D-IN051A-EN-P - February 2001

The module is equipped with AutoBaud detect. AutoBaud lets the

module read the settings already in use on your DeviceNet network

and automatically adjusts to follow those settings.

Install the Module

This module mounts to the following cable bases:

• 1792D-CBFM for KwikLink™ flat media installation

• 1792D-CB12 for 12mm drop cable installation

• 1792D-CB18 for round media trunk connection

• or other optional cable base assembly.

To install the module:

1. Position the module over the mounted cable base. Align the

three captive screws in the module with the accepting

receptacles in the base.

2. Tighten the screws to secure the module to the base.

IMPORTANT

The cable base should already be installed. See

publication 1792D-IN009B-EN-P to install the cable

base.

IMPORTANT

Proper alignment of the screws is necessary to

complete the connections between the module

contacts and the cable contacts.

1 2 3 4 5 6 7 8 9 ... 15 16

Pas de commentaire

Rockwell-automation 1792D-8BV0D ArmorBlock MaXum 8 Input Module with 8 Manuel d'utilisateur Page 4