Rockwell-automation 1792-OB8PLP INSTL INSTR 8 OUTPUT MODULE Manuel d'utilisateur télécharger pdf (Page 6)

ArmorBlock-LP 8 Output Module6

Publication

1792-5.7 – December 1997

Connecting the Output Power Wiring

Connect output power wiring to the 3-pin mini-connector on the end of

the block.

Important:

The outputs use electronic overcurrent fault protection. Make certain

your output power supply can handle overcurrent events.

Output Power Mini-Connector

Pin 1 = Chassis ground

Pin 2 = +24V dc

Pin 3 = Negative/Return

(View into pins)

Connecting the DeviceNet Wiring

Connect DeviceNet wiring to the 5-pin mini-connector on the end of the

block. Connections are shown below.

DeviceNet Mini-Connector

Pin 1 = Drain (Bare)

Pin 2 = V+ (Red)

Pin 3 = V– (Black)

(View into pins)

Pin 4 = CAN–HI (White)

Pin 5 CAN–LO (Blue)

Note:

Colors are

DeviceNet standard

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Rockwell-automation 1792-OB8PLP INSTL INSTR 8 OUTPUT MODULE Manuel d'utilisateur Page 6