Rockwell-automation 1771-IFE , D17716.5.90 USER MNL. ANALOG INPUT Modu Manuel d'utilisateur télécharger pdf (Page 21)

Installing the Input Module

Chapter 2

2-9

The analog input module (1771-IFE) has configuration plugs for

determining the input type (voltage or current) desired for each input. The

module comes from the factory with the plugs positioned for

voltage inputs.

To set the configuration plugs for your desired inputs, proceed as follows:

1. Remove the module’s covers by removing the four screws securing

the covers to the module.

2. Locate the selection plugs (Figure 2.7).

Figure 2.7

Configuration

Plug Locations

Selection Plugs

(refer to Figures 2.8, 2.9 and 2.10)

10950I

3. Position the plugs as shown in the Figures for your particular module

(Figures 2.8, 2.9 and 2.10).

4. Reassemble the module after you have finished checking and/or

setting the selection plugs.

Changing the Module's

Configuration

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 62 63

Pas de commentaire

Rockwell-automation 1771-IFE , D17716.5.90 USER MNL. ANALOG INPUT Modu Manuel d'utilisateur Page 21