Rockwell-automation 1762-IF2OF2 MicroLogix Analog Input/Output Module Manuel d'utilisateur télécharger pdf (Page 12)

12 MicroLogix 1762-IF2OF2 Analog Input/Output Module

Publication 1762-IN005C-EN-P - July 2013

Input Type Selection

Select the input type, current or voltage, using the switch located on the module’s circuit board

and the input type/range selection bits in the Configuration Data File (seeConfiguration Data

File on page 19). You can access the switch through the ventilation slots on the top of the

module. Switch 1 controls channel 0; switch 2 controls channel 1. The factory default setting for

both switch 1 and switch 2 is Current. Switch positions are shown below.

Output Type Selection

The output type selection, current or voltage, is made by wiring to the appropriate terminals,

Iout or Vout, and by the type/range selection bits in the Configuration Data File

(seeConfiguration Data File

on page 19 ).

Current (ON) Default

Voltage (OFF)

Switch 1 = Channel 0

Switch 2 = Channel 1

Switch Location

45162

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

Pas de commentaire

Rockwell-automation 1762-IF2OF2 MicroLogix Analog Input/Output Module Manuel d'utilisateur Page 12