Rockwell-automation 1757-SWKIT400 Getting Started with ProcessLogix R4 Manuel d'utilisateur télécharger pdf (Page 17)

Getting Started with ProcessLogix R400.0 17

Publication 1757-QS040A-EN-P - October 2001

Creating a PID Loop

The next step is to create a Control Module to control a process. In this example,

we create a PID loop.

Creating the Control Module

To create the Control Module:

1. Click File⇒New⇒Control Module. You see a blank window for the Control

Module in the center of your screen.

2. Rename the Control Module:

a. Double-click anywhere in the CM Window. You see the Parameter

window.

b. In the Name field, enter FIC102.

3. Select the Server tab and enter the following parameters:

4. Click OK to close the Parameter window.

5. Save your changes by clicking File⇒Save. Notice that the new Control

Module name appears in the Project Tab.

6. Close the Control Module FIC102.

in this field: enter (not case-sensitive):

Point Detail Page sysdtlpida.dsp

Group Detail Page sysgrppida.dsp

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Pas de commentaire

Rockwell-automation 1757-SWKIT400 Getting Started with ProcessLogix R4 Manuel d'utilisateur Page 17