Rockwell-automation 1757-PIM ProcessLogix Pulse Input Module Installat Manuel d'utilisateur télécharger pdf (Page 6)

6 ProcessLogix Pulse Input Module

Publication 1757-IN900A-US-P - February 2000

 If desired, enter a Module Description to explain the function of the

1757-PIM (such as Test Strategy PIM). This is not a required field.

 Enter appropriate values for IOM Slot Number, Remote IO Chassis MAC

Address and CNI Slot Number. If necessary, press F1 to access on-line help

for assistance during this step.

 Use the following procedures to configure parameters on the remaining tabs

for the 1757-PIM, or click OK to accept only the changes made so far and

return to the Project tree.

 Under the Module Configuration tab (see figure below), enter desired values

for configuration parameters. If necessary, press F1 to access on-line help for

assistance during this step.

TIP

The only available choice is whether or not to select the

Alarming Enabled checkbox. Once the module has been

loaded and activated, additional parameters (such as Execution

State) may be configured on the Monitoring Tree window.

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Pas de commentaire

Rockwell-automation 1757-PIM ProcessLogix Pulse Input Module Installat Manuel d'utilisateur Page 6