Rockwell-automation 1756-EWEB ControlLogix EtherNet/IP Web Server Modu Manuel d'utilisateur télécharger pdf (Page 14)

14 EtherNet/IP Web Server Module

Publication

1756-IN588A-EN-P - February 2004

Connect the Module to the EtherNet/IP Network

Attach the RJ45 connector to the EtherNet/IP port on the bottom of the

module as shown below:

WARNING

If you connect or disconnect the communications

cable with power applied to this module or any device

on the network, an electrical arc can occur. This could

cause an explosion in hazardous location installations.

This is the bottom, back of the module that

connects into the chassis.

RJ-45 EtherNet/IP

connector

Connect the cable

here.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 29 30

Pas de commentaire

Rockwell-automation 1756-EWEB ControlLogix EtherNet/IP Web Server Modu Manuel d'utilisateur Page 14