Rockwell-automation 1746-BAS-T SLC 500 Basic Module/ Instructions Manuel d'utilisateur télécharger pdf (Page 18)

18 SLC 500 BASIC and BASIC-T Modules

Publication 1746-IN009B-EN-P - August 2005

Wire to the DH485 Port

Port DH485 can communicate to user devices through the DH485 communication

mode. Use a 1747-C10 cable or 1747-C13 cable to connect the module to a link

coupler interfaced with the DH485 network.

Figure 13 Connecting the Module to a DH485 Network

IMPORTANT

The 1747-C13 cable acts only as a communication link and does

not carry 24V dc power. Use a 1747-C10 cable or 1747-C11 cable

to carry power from the controller to the link coupler, or from the

module to the link coupler.

To DH485 Network

SLC 5/01, 5/02, and

5/03 Controller

SLC 5/04 or 5/05

Controller

BASIC or BASIC-T Module

1747-AIC

Link Coupler

1747-AIC

Link Coupler

1747-C13 Cable

1747-C10 or -C11 Cable

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

Pas de commentaire

Rockwell-automation 1746-BAS-T SLC 500 Basic Module/ Instructions Manuel d'utilisateur Page 18