Rockwell-automation 1738-8CFGM23 ArmorPoint Module with Configurable 2 Manuel d'utilisateur télécharger pdf (Page 6)

6 ArmorPoint I/O Modules with 8 Configurable 24V DC Points

Publication

1738-IN026B-EN-E - February 2010

Install the mounting as follows:

1. Lay out the required points as shown above in the drilling dimension

drawing.

2. Drill the necessary holes for M4 (#8) machine or self-tapping screws.

3. Mount the base using M4 (#8) screws.

4. Ground the system using the ground lug connection.

The ground lug connection is also a mounting hole.

Mounting Base

Install the Digital Module

Follow the instructions to install the analog input module.

1. Using a bladed screwdriver, rotate the keyswitch on the mounting base

clockwise until the number 1 aligns with the notch in the base.

Ground lug connection

Latching mechanism

Keyswitch

Set to position 1,

for the 1738 24V DC

input modules

43675

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Pas de commentaire

Rockwell-automation 1738-8CFGM23 ArmorPoint Module with Configurable 2 Manuel d'utilisateur Page 6