Rockwell-automation 1734-OV2E_4E_8E POINT I/O Protected Sink Output Mo Manuel d'utilisateur télécharger pdf (Page 9)

POINT I/O Protected Sink Output Module 9

Publication

1734-IN585C-EN-E - December 2005

To install the module on the DIN rail, proceed as follows.

1. Use a bladed screwdriver to rotate the keyswitch on the

mounting base clockwise until the number required for the

type of module being installed aligns with the notch in the

base.

2. Be sure the DIN rail locking screw is in the horizontal

position.

If you unlock the locking mechanism, you cannot insert the

module.

44009

Notch

(position 3 shown)

Turn the keyswitch to align the number with the notch.

44010

Make sure the DIN rail

locking screw is in the

horizontal position.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 27 28

Pas de commentaire

Rockwell-automation 1734-OV2E_4E_8E POINT I/O Protected Sink Output Mo Manuel d'utilisateur Page 9