Rockwell-automation 1503 IntelliVAC Contactor Control Module - Series Manuel d'utilisateur télécharger pdf (Page 12)

Chapter 2

1503-UM052D-EN-P – June 2013

Receiving and Storage

Receiving Upon receiving the controller, remove the packing and check for damage

that may have occurred during shipping. Report any damage immediately

to the claims office of the carrier.

NOTE: If the IntelliVAC module is an integral component of a

complete MV controller (Bulletin 1500/1900), special receiving and

handling instructions will apply. For details, refer to the service manual

provided with the equipment.

Storage It is important to consider the following storage requirements if you are

not installing your controller immediately after receiving it.

• Store the controller in a clean, dry, dust-free environment.

• Storage temperature should be maintained between -40°C and 85°C (-

40°F and 185°F).

• Relative humidity must not exceed 95%, non-condensing.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 52 53

Pas de commentaire

Rockwell-automation 1503 IntelliVAC Contactor Control Module - Series Manuel d'utilisateur Page 12