Rockwell-automation 1394-DIM Installing Your Drive Interface Module Manuel d'utilisateur télécharger pdf (Page 4)

4 Installing Your 1394 Drive Interface Module

Mounting Your 1394-DIM

To mount your 1394-DIM hardware:

1. Install the top mounting fastener on the system panel. The head of

the fastener must be at least 0.25 inches from the panel.

Hang the 1394-DIM on the top mounting fastener.

Important: The 1394-DIM must be the last (or right-most)

module in the 1394 system.

Engage the alignment tabs, as shown in the figure below.

Figure 5

Engaging the Alignment Tab

Slide the slide-and-lock mechanism on the 1394-DIM to the left

until it locks into place, as shown in the figure below.

Figure 6

Attaching the Slide-and-Lock Mechanism

Engaged alignment tab

Slide-and-lock

mechanism

1 2 3 4 5 6 7 8 9 ... 15 16

Pas de commentaire

Rockwell-automation 1394-DIM Installing Your Drive Interface Module Manuel d'utilisateur Page 4