Rockwell Automation 1784-KTXD Manuel d'utilisateur télécharger pdf (Page 24)

3-2 Installing the Card Inside the Computer

1784-6.5.27 - September 1997

Necessary Tools

You need one of these tools to remove the cover from your central

processing unit (CPU):

• Phillips-head screwdriver

• flat-head screwdriver

Accessing the Computer’s PCI Bus Slots

To install the PKTx card, you must have access to the computer’s PCI bus.

Refer to your computer’s hardware manual for instructions about how to:

1. Shut down the computer.

2. Turn off power to the computer.

Important: If you disconnect the ac power from the computer, you lose

the chassis ground. Electrostatic damage (ESD) protection is

lost.

3. Remove the computer’s CPU cover (according to the manufacturer’s

instructions).

4. Select a vacant PCI bus slot.

Important: The 1784-PKTx will function only in a PCI bus slot.

5. Remove the rear bracket slot’s expansion cover by loosening the screw

on the back of the computer.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 62 63

Pas de commentaire

Rockwell Automation 1784-KTXD Manuel d'utilisateur Page 24