Rockwell-automation 20D DriveLogix Controller for PowerFlex 700S Phase Manuel d'utilisateur télécharger pdf (Page 2)

2 DriveLogix Controller for PowerFlex 700S Phase I Drives

What You Need To Do

To remove an existing DriveLogix controller from the drive:

❑ Step 1: Remove power from the drive

❑ Step 2: Remove the covers from the Control assembly

❑ Step 3: Remove the existing DriveLogix controller assembly

❑ Step 4: If necessary, remove the Communication Daughter card

To install a new DriveLogix controller on the drive:

❑ Step 5: If necessary, install the Communication Daughter card

❑ Step 6: Connect the battery

❑ Step 7: Install the stacker connectors

❑ Step 8: Install the new DriveLogix controller assembly

❑ Step 9: Complete the Installation of the DriveLogix Controller

❑ Step 10: Connect the controller to a device

❑ Step 11: Install the drive covers

Additional Information

• Monitor the DriveLogix Controller LEDs

• DriveLogix Controller Specifications

1 2 3 4 5 6 7 ... 17 18

Pas de commentaire

Rockwell-automation 20D DriveLogix Controller for PowerFlex 700S Phase Manuel d'utilisateur Page 2