Rockwell-automation 20D DriveLogix Controller for PowerFlex 700S Phase Manuel d'utilisateur télécharger pdf (Page 16)

16 DriveLogix Controller for PowerFlex 700S Phase I Drives

Monitoring the DriveLogix

Controller LEDs

ATTENTION: The controller LEDs are only operational when

the drive is energized, and only visible with the drive door open.

Servicing energized equipment can be hazardous. Severe injury

or death can result from electrical shock, burn or unintended

actuation of controlled equipment. Follow Safety related

practices of NFPA 70E, ELECTRICAL SAFETY FOR

EMPLOYEE WORKPLACES. DO NOT work alone on energized

equipment!

Type Name Color State Description

Daughter card

LEDs

PORT Green – Status of DPI port internal communications (if

present).

MOD Yellow – Status of communications module (when

installed).

NET A Red – Status of network (if connected).

NET B Red – Status of secondary network (if connected).

NET A OFF No power,

Host is faulted,

Host is holding daughter card in reset.

Red Steady Major Fault

Red Flashing Minor Fault

Green Flashing No connections established

Green Steady Connections established

NET B OFF No power,

Host is faulted,

Host is holding daughter card in reset.

Red Steady Major Fault

Red Flashing Minor Fault

Green Flashing No connections established

Green Steady Connections established

1 2 ... 11 12 13 14 15 16 17 18

Pas de commentaire

Rockwell-automation 20D DriveLogix Controller for PowerFlex 700S Phase Manuel d'utilisateur Page 16