Rockwell-automation 1756-Lx_Mx ControlLogix Controller and Memory Boar Manuel d'utilisateur télécharger pdf (Page 32)

32 ControlLogix Controller and Memory Board

Publication

1756-IN101L-EN-P - June 2008

Update the Controller

1. Connect the controller or chassis to the same network as your

workstation.

2. Start ControlFLASH software.

3. Click Next.

4. Select the catalog number of the controller, and click Next.

5. Expand the network until you see the controller.

IMPORTANT

RSLogix 5000 software, version 10.0 or later, lets you update the firmware

of a controller as part of the download sequence. To update the controller,

download your project and follow the prompts of the software.

IMPORTANT

If the required network is not shown, first configure a driver for the

network in RSLinx software.

To expand a network one level, do

one of the following:

• Double-click the network.

• Select the network and

press the

→ key.

• Click the + sign.

Workstation

Linx Gateways, Ethernet

driver

communication module

backplane

controller

−

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 51 52

Pas de commentaire

Rockwell-automation 1756-Lx_Mx ControlLogix Controller and Memory Boar Manuel d'utilisateur Page 32